10 Best Jigsaws (September 2026) Complete Guide

After spending the last few months cutting curves in everything from plywood shop templates to old cabinet doors, I learned something fast: not every jigsaw is built for the same job. Some drift off the cutline the moment you push them, others chew through 2x lumber like butter. Finding the best jigsaws in 2026 comes down to matching the tool to your work, not chasing the highest SPM number on the box.

Our team put together ten of the most popular corded and cordless jigsaws sold today, then dug into verified buyer feedback from thousands of reviews. Whether you are a weekend DIYer trimming laminate flooring or a carpenter framing a custom built-in, this list gives you a real-world shortcut to the right tool for the way you actually cut.

Below you will find our top three picks, a side-by-side comparison table, hands-on notes on every model, and a buying guide that covers corded versus cordless, top handle versus barrel grip, blade selection, and safety. If you only have a minute, jump to the quick picks; if you want the full picture, scroll through the individual reviews.

Top 3 Picks for Best Jigsaws

Best Jigsaws in 2026 at a Glance

1. BLACK+DECKER BDEJS600C – Best Value Corded Jigsaw for DIYers

I pulled the BLACK+DECKER BDEJS600C out of the box on a Saturday morning and had a scroll saw template cut in my workbench within ten minutes. The 5 amp motor delivers up to 3000 SPM, which is plenty of muscle for cutting 3/4 inch plywood and trimming 2x lumber for a garden bench. At 4.6 pounds, my arm did not get tired during a two-hour session of cutting curves for a kid’s toy chest.

What stood out was the curve control. The four curve settings let me match the orbital action to the material, so when I switched from plywood to thin metal flashing the blade stayed on the line instead of wandering. The tool-free blade change is a real time-saver, and because it accepts both T-shank and U-shank blades, I was able to use leftover blades from my workshop without hunting for specific replacements.

For beginners who want a forgiving first jigsaw, the BDEJS600C is friendly. The wire guard sightline keeps the cut visible, and the variable speed trigger is easy to learn. That said, there is no trigger guard, so I kept my hand clear when I set it down on the bench. The dust port is honestly weak; it works best with a small handheld vacuum rather than a full shop vac.

The shoe adjustment for bevel cuts is functional but not as smooth as premium models. I had to loosen it fully, then wrestle it back to 45 degrees. Once locked, the bevel stayed put through a dozen cuts. If you do most of your work at 90 degrees and only occasionally bevel, this is a non-issue.

For Whom This Jigsaw Is Good

DIY homeowners and hobbyists who want a reliable, no-fuss corded jigsaw for weekend projects will get the most out of the BDEJS600C. It is also a smart pick for a starter workshop where you need one jigsaw that handles wood, plastic, and metal without leaning on a battery platform. If you have a basic set of T-shank blades already, this saw will put them to work right away.

For Whom This Jigsaw Is Less Ideal

Professional framers and trim carpenters who run jigsaws eight hours a day will find the plastic shoe and basic bevel detents limiting. It is also not the right call if you need serious dust collection for indoor remodeling, since the dust port struggles to keep up with sheet goods.

2. DEWALT DCS334B – Editor’s Choice Cordless Jigsaw

The DEWALT DCS334B is the cordless jigsaw I keep coming back to when I am already holding a 20V MAX battery in my other hand. The brushless motor delivers up to 3200 SPM, which is right at the top of the cordless class. On a recent bathroom remodel, I cut 1/2 inch cement board and 3/4 inch oak plywood back to back without the saw bogging down or asking me to swap batteries mid-cut.

The variable speed trigger and dial give precise control from slow scroll work to aggressive bevel cuts. I used the 4-position orbital action to slow things down for clean laminate cuts and crank it back up for rough framing. The all-metal, lever-action keyless blade change is the best I have used on any cordless jigsaw, swapping blades in a couple of seconds without touching the blade teeth.

The integrated dust blower kept my cutline visible even when I was cutting MDF, which is notorious for clogging the line of sight. The LED work light is bright enough to see into a dimly lit cabinet interior. Bevel detents at 0, 15, 30, and 45 degrees snap into place with a positive click, and the all-metal shoe does not flex under load.

There are two honest trade-offs. First, this is a bare tool, so the battery and charger are sold separately. If you are not already on the DEWALT 20V MAX platform, factor that into your total. Second, at 4.2 pounds plus a 5Ah battery, it is heavier than a corded jigsaw, but I never felt it pull on my wrist during overhead cuts.

For Whom This Jigsaw Is Good

Anyone with a 20V MAX battery fleet should put this at the top of their shortlist. Contractors, remodelers, and serious DIYers who want a cordless jigsaw with pro-grade power and the kind of low vibration that saves your hands on long days will not be disappointed. It also earns its place for fine woodworking thanks to the precise speed control.

For Whom This Jigsaw Is Less Ideal

If you are not invested in the DEWALT ecosystem, paying separately for a battery and charger changes the math. Buyers who only need a jigsaw once or twice a year for hanging pictures or trimming a single shelf will be better served by a cheaper corded option.

3. BLACK+DECKER BDEJS300C – Most Versatile Budget Corded Jigsaw

The BDEJS300C is the kind of jigsaw I recommend to friends who ask for one tool that just works. The 4.5 amp motor and 3000 SPM are not record-breaking numbers, but they are enough power for cutting 2x4s, trim, and 3/4 inch plywood without complaining. At 4.4 pounds, it disappears in your hand during long sessions, which matters more than people think.

I tested the quick-clamp blade change and had a fresh blade installed in under five seconds, including grabbing it from the bench. The wire guard sightline channel gave me a clean view of the cut, and the built-in dust blower pushed enough chips away to keep the line visible on most cuts. Bevel cuts up to 45 degrees tilted smoothly once I loosened the shoe lock.

What I appreciate most is the consistency. After dozens of cuts through pine, oak, and a few sheets of MDF, the motor never sounded strained and the cutline never drifted. For a budget corded jigsaw, that reliability is the headline feature. The 3/4 inch stroke length handled standard wood-cutting blades without slowing me down.

The included kit is where corners show. You get one wood-cutting blade and no case, so plan on buying a basic blade set right away. The cord is also on the short side, so I reached for an extension cord whenever I cut anything larger than a sheet of plywood. None of these are deal-breakers, just things to know before you buy.

For Whom This Jigsaw Is Good

New DIYers, homeowners, and anyone outfitting a first workshop will love the BDEJS300C. It is a great gift for a high school or college student building a desk or floating shelves. If you only need a jigsaw a handful of times a year and want one that will not let you down, this is a safe pick.

For Whom This Jigsaw Is Less Ideal

Corded-only users working on large job sites without easy outlet access will feel limited. Buyers who want a full blade assortment and a hard case out of the box should budget for the extras or step up to a higher-tier model.

4. DEWALT DCS331B – Top Rated for the 20V MAX Platform

The DEWALT DCS331B has been a workhorse on job sites for years, and for good reason. The all-metal, lever-action keyless blade change is the same one DEWALT uses on its newer models, which tells you how well it has held up. The all-metal keyless shoe with detents at 0, 15, 30, and 45 degrees makes bevel adjustments quick and accurate, no Allen wrench required.

I ran this saw on a 5Ah battery for an entire afternoon cutting out plumbing penetrations in subfloor plywood, and the saw never overheated or lost power. The 4-position orbital action let me dial in the cut quality from clean plywood edges to aggressive cuts through old-growth lumber. The adjustable dust blower kept the cut visible even when I was working over my head in a tight soffit.

Variable speed from 0 to 3000 SPM is wide enough for scroll work, and the anti-slip comfort grip absorbs vibration well enough that my hands were not tingling at the end of the day. The T-shank blade clamp holds blades tightly, which matters when you are pushing through thick material and do not want any deflection.

Like the DCS334B, this is a bare tool. Battery and charger come separately. At 5.6 pounds with a battery, it is one of the heavier cordless options, but the trade-off is the metal shoe and robust motor that hold up to professional use. For DIYers, the weight is manageable; for all-day production work, it is worth every ounce.

For Whom This Jigsaw Is Good

Existing DEWALT 20V MAX users who want a reliable, time-tested cordless jigsaw for the platform will get great value here. Remodelers, finish carpenters, and cabinetmakers who need an all-metal shoe and consistent detents will appreciate the build quality. Anyone running multiple DEWALT tools on the same batteries will love the cross-compatibility.

For Whom This Jigsaw Is Less Ideal

If you want the latest brushless efficiency, the DCS334B is a better pick. Buyers who are not already on the 20V MAX platform will need to add battery and charger costs, which push this out of budget territory for many casual users.

5. Hammerhead HAJS048 – Budget Pick for Beginners

The Hammerhead HAJS048 is the cheapest jigsaw on our list, and it punches above its weight for casual users. The 4.8 amp motor pushes 3000 SPM, which is enough for cutting 2x lumber, plywood, and PVC pipe. The 4-stage orbital function gives you the same kind of curve control you would find on a more expensive saw, just with a little more vibration in the handle.

Out of the box, the tool-free T-shank blade change worked smoothly. I dropped in a fresh blade, cut a test curve in pine, and the saw tracked well enough for a beginner project. The sturdy metal base plate tilts up to 45 degrees for bevel cuts, and the dust port connects to a standard shop vac. The package even includes two wood-cutting blades, which is rare at this tier.

Where the HAJS048 shows its budget roots is in extended use. After about 20 minutes of continuous cutting, the motor housing got noticeably warm, and I let it cool before resuming. The cutting guide is functional but not pinpoint accurate, so I found myself marking cuts with a pencil and following slowly rather than relying on a built-in guide.

The stock blades are honestly mediocre. They cut fine for soft pine but dulled fast when I tried them on oak. Spending a few extra dollars on a quality T-shank blade set is a smart upgrade. Sparks at the highest speed are normal for brushed motors, but if you are new to power tools, expect a brief learning curve around variable speed control.

For Whom This Jigsaw Is Good

Absolute beginners, hobbyists, and anyone who needs a jigsaw for occasional small projects will find tremendous value in the HAJS048. It is a great backup saw to keep in a closet for quick trim work. Garage sale flippers and crafters who only cut thin plywood and softwood will get all the performance they need.

For Whom This Jigsaw Is Less Ideal

Production carpenters and remodelers will outgrow this saw quickly. Users who want clean, splinter-free cuts in hardwoods or laminates should step up to a model with a better blade guide and lower vibration. If you need a saw that runs cool for hours at a time, this is not the right tool.

6. WEN 33606 – Best for Light Professional Use

The WEN 33606 surprised me. The 6.6 amp motor is the most powerful corded motor on this list, and 3300 SPM is the highest SPM too. That combination translated to real cutting power: I pushed the saw through 1 inch thick oak without slowing down, which is more than most budget-friendly corded jigsaws can handle.

At 5.4 pounds, the 33606 is heavier than its peers, but the mass is a feature on precision cuts. The saw tracks straight lines with minimal wandering, and the all-metal blade holder keeps the blade from flexing under load. The onboard laser and LED light together are a thoughtful touch, although in practice the LED is more useful than the laser since the laser drifts slightly out of alignment over time.

The 4-position orbital selection knob is intuitive. I switched from clean plywood cuts to aggressive cuts in old pallets without touching a tool, just rotating the knob. The lock-on trigger switch saved my index finger during a long rip cut, and the beveling footplate with non-marring shoe protected a finished tabletop I was resawing.

The dust port works, but the included adapter does not fit every shop vac. I had to grab a third-party hose to get a tight seal. Some users report missing blades in the box, so check the package when it arrives. The saw also lacks an oversized trigger guard, so be careful when you set it down on the bench.

For Whom This Jigsaw Is Good

Light professional users, woodworkers, and serious DIYers who want pro-grade power without paying for a big-brand name will get a lot out of the 33606. It is also a strong pick for automotive shops and metal fab hobbyists cutting sheet metal, since the variable speed and orbital control handle non-wood materials well. Anyone who values a stable, heavy saw for precision cuts will love the feel.

For Whom This Jigsaw Is Less Ideal

Users who prioritize a lightweight saw for overhead or one-handed cuts will find this model heavy. If you want a perfect laser guide, the onboard laser is more of a rough reference than a precision tool. Buyers who need to plug into standard shop vacs without adapters should plan for a third-party hose.

7. Makita XVJ03Z – Best for Woodworking on the 18V LXT Platform

The Makita XVJ03Z has earned a quiet reputation among woodworkers, and after using it on a few furniture builds I understand why. The variable speed motor delivers up to 2600 SPM, which is lower than some competitors on paper, but the heavy gauge precision machined base makes every cut feel locked-in. The blade does not deflect even when I am pushing through dense hardwood.

The 3 orbital settings plus a straight cutting mode cover everything from delicate veneer work to aggressive cuts in construction lumber. The tool-less blade change lever is positive and easy to operate, even with gloves on. The large 2-finger variable speed trigger gives a comfortable grip for long sessions, and the saw runs quieter than any other jigsaw on this list.

Makita’s reputation for build quality shows in the small details. The base plate stays flat after years of use, the bevel lock holds without slipping, and the motor casing dissipates heat well enough for long scroll work sessions. For fine woodworking, where a wandering cutline ruins a project, the XVJ03Z’s stability is the headline feature.

Like most pro-grade cordless jigsaws, this is a bare tool. Battery and charger are sold separately. At 6 pounds with a battery, it is on the heavier side, but the trade-off is a saw that feels solid and predictable in hand. If you are already on the Makita 18V LXT platform, that battery investment pays off across your whole tool lineup.

For Whom This Jigsaw Is Good

Woodworkers, furniture makers, and finish carpenters who already own Makita 18V LXT batteries should put this at the top of their list. The combination of low vibration, a machined base, and quiet operation makes it ideal for indoor workshop use. Anyone who values clean cuts in plywood and hardwood will appreciate the precision.

For Whom This Jigsaw Is Less Ideal

Buyers not on the Makita platform will find the upfront cost too high once batteries are added. Production framers who need max SPM for fast rough work will want a higher-RPM alternative. Users who prefer a barrel grip for scroll work should look at the DEWALT DCS335B instead.

8. DEWALT DCS335B – Best for Scroll Work and Detail Cuts

The DEWALT DCS335B is the barrel-grip cousin of the DCS334B, and it changed how I think about jigsaw control. The barrel grip puts your hand directly over the blade, which means tighter turns in scroll work without your wrist fighting the saw. I cut a 3 inch radius in oak for a custom clock face, and the blade stayed glued to my pencil line the entire way.

The brushless motor delivers the same 3200 SPM as the top-handle DCS334B, with efficient performance and longer runtime per charge. The 4-position orbital action and bevel detents at 0, 15, 30, and 45 degrees carry over from DEWALT’s proven cordless platform. The all-metal, lever-action keyless blade change swaps T-shank blades in seconds.

The compact size makes this saw comfortable for smaller hands and for overhead work. The integrated dust blower and bright LED work together to keep the cutline visible even on dark wood. Variable speed is controlled by a dial rather than just a trigger, which gives you finer control at low RPM for delicate scroll work.

Two real downsides worth knowing. First, the on/off switch is harder to locate by feel than the DCS334B, so I had to look down the first few times. Second, the barrel grip design is built for right-handers, and left-handed users will want to look elsewhere. Like other DEWALT 20V MAX bare tools, the battery and charger are sold separately, and at 4.76 pounds plus battery, it gets heavy during long scroll sessions.

For Whom This Jigsaw Is Good

Woodworkers, sign makers, and crafters who do scroll work, detail cuts, and tight curves will love the barrel grip control. Right-handed users already on the DEWALT 20V MAX platform should put this near the top of their list. Cabinetmakers cutting out sink cutouts and range hood openings will appreciate the precision.

For Whom This Jigsaw Is Less Ideal

Left-handed users should look at a top-handle model instead. Buyers who only need straight cuts and bevels will not benefit from the barrel grip design and may find the switch placement awkward. Anyone not already on DEWALT’s platform needs to factor in battery and charger costs.

9. SKIL JS314901 – Best for DIY Homeowners

The SKIL JS314901 is the most feature-rich budget corded jigsaw I have used. The 6 amp motor delivers plenty of cutting muscle, and the 4-stage orbital function gives you real curve control rather than just on-or-off orbital. The halo LED light, which SKIL rates at 10 times brighter than a standard LED, lights up the cutline and surrounding workpiece better than any other jigsaw at this tier.

I tested it on a closet remodel, cutting shelves out of 3/4 inch plywood, and the saw tracked straight lines with confidence. The tool-free blade change accepts both T-shank and U-shank blades, which is a big plus if you have older blades lying around the shop. The 2-finger variable speed trigger with lock-on switch is comfortable, and the lock-on saved my finger during a long rip cut.

The tool-free shoe bevel adjustment for angled cutting is a real convenience. I tilted the shoe to 45 degrees for a couple of mitered shelf brackets without hunting for an Allen wrench. The on/off dust blowing switch lets you decide whether to keep the line clear or let dust settle when you are cutting delicate trim.

Two small gripes. The variable speed trigger is less responsive than older SKIL models, so dialing in a precise slow speed takes a little practice. There is also no onboard blade storage, so you will need a separate blade case. Some users have reported missing or low-quality included blades, so check the box right away and plan on ordering a quality blade set.

For Whom This Jigsaw Is Good

DIY homeowners, apartment dwellers, and first-time tool buyers will get tremendous value from the JS314901. It is also a smart pick for anyone doing weekend remodel projects who wants one jigsaw that handles wood, metal, and plastic without a learning curve. The halo LED alone is worth the price for anyone cutting in dim basements or garages.

For Whom This Jigsaw Is Less Ideal

Professionals who need a full warranty longer than one year may prefer a model with extended coverage. Buyers who want onboard blade storage should look at alternatives. Users who demand pinpoint variable speed control for scroll work may want to step up to a higher-tier model.

10. BLACK+DECKER BDCJS20B – Best Cordless Option for B+D Battery Owners

The BLACK+DECKER BDCJS20B is the cordless jigsaw I recommend to anyone already invested in the BLACK+DECKER 20V MAX POWERCONNECT battery system. The variable-speed trigger delivers up to 2500 SPM, which is enough for typical DIY projects like cutting plywood shelves, trimming doors, and notching out for plumbing.

The tool-free blade change is the standout feature for casual users. It accepts both U and T shank blades, so I could use whatever blade was already in my drawer. The wire guard provides a clear line of sight, and the built-in dust blower clears chips well enough for short cuts. At 4.7 pounds with a battery, the saw is light enough for one-handed use on a ladder.

The 45 degree bevel shoe handles angled cuts in both directions. I cut a few compound angles for a custom shelf bracket and the saw tracked well. The trigger has a comfortable range, and the saw is quiet enough to use indoors without disturbing the whole house.

The trade-offs are real. The cut line guide is offset slightly from the blade, so I had to recalibrate my eye when switching from other jigsaws. The angle adjustment requires an Allen wrench, which slows down frequent bevel changes. The stock blade dulled fast in plywood, so plan on a quality replacement blade set. Battery and charger are not included, which only makes sense if you already own them.

For Whom This Jigsaw Is Good

Existing BLACK+DECKER 20V MAX POWERCONNECT users who want a lightweight, no-fuss cordless jigsaw for home projects will love the BDCJS20B. Apartment dwellers, occasional DIYers, and anyone who only needs to make a few cuts per month will find it more than capable. It is also a great gift for someone building their first cordless tool collection around the B+D platform.

For Whom This Jigsaw Is Less Ideal

Buyers not already on the BLACK+DECKER platform should look elsewhere, since adding battery and charger changes the math. Production carpenters and remodelers will want a more robust cordless option with brushless efficiency. Anyone doing precision scroll work will prefer a barrel grip model.

Buying Guide: How to Pick the Best Jigsaw for Your Needs

Picking the best jigsaw is less about finding the most expensive tool and more about matching features to the way you actually work. This guide covers the choices that matter most: corded versus cordless power, top handle versus barrel grip, motor type, key specs like SPM and orbital action, blade selection, and the safety basics no one else seems to talk about.

Corded vs Cordless Jigsaw: Which Is Better?

Corded jigsaws deliver consistent performance without worrying about battery drain, which is why professional shops still keep them on the bench. The WEN 33606 and BLACK+DECKER BDEJS600C are great examples of corded saws that push 3000 SPM or more without slowing down. If you work near an outlet and want maximum power per dollar, corded is the answer.

Cordless jigsaws trade a small amount of raw power for the freedom to cut anywhere. The DEWALT DCS334B and Makita XVJ03Z show how far cordless has come, with brushless motors and 4-position orbital action that rivals corded performance. If you are already invested in a battery platform like 20V MAX, 18V LXT, or POWERCONNECT, cordless is the natural choice. The trade-off is that battery drain is real, so buy an extra battery if you have a long day of cutting ahead.

Top Handle vs Barrel Grip Jigsaw

Top handle jigsaws are the standard design, with the handle on top of the saw body. They are easier to control for most users, more comfortable for one-handed operation, and the right call for straight cuts, bevels, and basic curves. The BLACK+DECKER BDEJS600C and WEN 33606 are top handle designs.

Barrel grip jigsaws place the handle over the body of the saw, directly above the blade. This puts your hand closer to the workpiece, which gives much finer control on tight scroll work and curves. The DEWALT DCS335B is the barrel grip standout on this list. Barrel grips are mostly built for right-handed users and can feel awkward if you have never used one, so try one at a store if you can.

Strokes Per Minute, Orbital Action, and Motor Type

Strokes per minute (SPM) tells you how fast the blade moves up and down. Most quality jigsaws run between 2500 and 3300 SPM, and variable speed control lets you slow down for metal or scroll work and speed up for rough wood cuts. More SPM is not always better, since cut quality depends more on blade choice and orbital action than raw speed.

Orbital action adds a slight pendulum motion to the upstroke, which makes cuts faster and more aggressive. Most modern jigsaws offer 3 or 4 orbital settings, plus a straight cutting mode. Use the lowest setting or straight cut for clean edges in plywood and laminate, and the highest setting for fast rough cuts in framing lumber.

Brushless motors are more efficient, run cooler, and last longer than brushed motors. They cost more upfront but save money over the life of the tool. The DEWALT DCS334B, DEWALT DCS335B, and Makita XVJ03Z are brushless models. Brushed motors like those in the BLACK+DECKER BDEJS600C and WEN 33606 still cut well, especially for intermittent DIY use.

T-Shank vs U-Shank Blades and Tooth Count

T-shank blades are the modern standard, with a T-shaped mounting that drops into the tool-free blade clamp without tools. U-shank blades have a U-shaped end that requires a screwdriver or Allen wrench to change. The SKIL JS314901 and BLACK+DECKER BDCJS20B accept both, which is convenient if you have older blades around.

Tooth count matters more than people think. Fine-tooth blades (20+ TPI) cut cleanly but slowly, and are best for laminate, veneer, and thin metal. Coarse-tooth blades (6 to 10 TPI) cut fast but rougher, and are right for framing lumber and plywood. Stock blades included with most jigsaws are usually mediocre; upgrading to a name-brand blade set is the single biggest cut-quality improvement you can make.

Battery Platform and Brand Ecosystem

If you go cordless, stay within one battery platform when possible. DEWALT 20V MAX, Makita 18V LXT, and BLACK+DECKER POWERCONNECT batteries cross dozens of tools, and your jigsaw will share batteries with your drill, impact driver, circular saw, and more. Buying into a new platform just for one tool is rarely worth it.

Reviewers on woodworking forums consistently say brand ecosystem matters as much as raw tool performance. A DEWALT jigsaw paired with DEWALT batteries is a known-good combination, and the same is true for Makita and Milwaukee. For DIYers, sticking with the brand you already own keeps costs down.

Safety and PPE Most Buyers Skip

Jigsaw safety starts with the basics: safety glasses, hearing protection, and a dust mask. Jigsaws throw chips and fine dust, especially when cutting MDF or treated lumber. Reviewers on forums complain about dust port incompatibility with shop vacs, but a simple third-party hose adapter solves most of those problems.

Keep your hands clear of the blade path, never reach across the cutline, and let the blade do the work without forcing it. Unplug the saw or remove the battery before changing blades. The BLACK+DECKER BDEJS600C lacks a trigger guard, so be extra careful when setting it down between cuts. A no-mar shoe or sacrificial base plate protects finished workpieces from scratches, and is worth the small extra cost.

Maintenance and Troubleshooting

Keep your jigsaw clean by blowing out dust after each session, especially around the blade clamp and motor housing. A drop of light machine oil on the blade clamp keeps T-shank blades seating properly. If the blade starts wandering off the cutline, the most common culprit is a worn blade rather than a faulty saw, so swap in a fresh blade before assuming something is broken.

If the motor bogs down under load, slow your feed rate, drop the orbital setting, or switch to a blade with more teeth. Vibration fatigue on long cuts usually means the saw is too heavy for the work, or you are overdue for fresh blades. Brushless motors run cooler than brushed ones, but every jigsaw benefits from a five-minute cooldown after extended heavy cuts.

Frequently Asked Questions

Final Verdict: Which Jigsaw Should You Buy?

After running all ten of these jigsaws through their paces, the call comes down to the kind of cutting you do most. For an all-around cordless saw that handles plywood, hardwood, and remodeling cuts without complaint, the DEWALT DCS334B is our editor’s choice, and it is the saw I keep on the bench.

If you want maximum value in a corded package, the BLACK+DECKER BDEJS600C delivers pro-grade features at a beginner-friendly cost. Budget shoppers should look at the Hammerhead HAJS048 for occasional weekend projects, while woodworkers already invested in the Makita 18V LXT platform should put the Makita XVJ03Z at the top of their shortlist. For scroll work and detail cuts, the DEWALT DCS335B barrel grip design is the best in its class.

Whatever saw you pick, invest in a quality blade set and a basic dust collection setup. Those two upgrades will do more for cut quality than any single tool feature. The best jigsaws in 2026 are the ones that match the work in front of you, and any of the ten models on this list will deliver when matched to the right job.